FDG3000 Flange facer is designed with lightweight and high precision consideration of different countries, it Adopts ascendant Processing technology to make sure the best accurateness and high efficiency. It’s widely used for petroleum, Chemical industry, electric plant, ship rebuilding, wind power etc.

Precise and smooth rotary output

Large, industrial grade, high precision rotary bearings provide stable, smooth motion output throughout the entire machine facing range, It can easily handle challenging flange repair applications to meet or restore the demanding requirements of the manufacturer.

Quick and easy set up

Flange facing machine adopt independent design of quick model parts, therefore, it’s fast to mount it and machining. A experienced operator will finish the mounting processing within an hour according to the rightful operating process.

Drive unit

Pneumatic & hydraulic drive options available, it can achieve cuts up to a maximum depth of 2mm (0.079″) on flanges without bolt holes or 0.5mm (0.02″) with holes.

Excellent expansion

Tube sheet mounting kit adds a mounted way for heat exchanger repair.

Milling head and distributor hoses for rotary milling

Back facing kit available for heat exchanger flange back faces in one setup.

FDG1650 Flange facer is designed with a reinforced center spindle and a rotating cutter arm for achieving stronger stability during cutting…

Superior machining

It can achieve working without mounting base unit, typical applications for on-site machining of heat exchanger, blind flange, and so on, This provides users with the flexibility to make more cuts including cut “O” Ring grooves, RTJ ,lens ring, and other V grooves, standard and compact flange facings, weld preparations,and other surfaces.

Precise body

Precision machined dovetail ways and adjustable Turcite-B coated gibes provide smooth accurate travel, and can give machine shop accuracy .

Base assembly

Equipped two pieces high strength mounting base unit with steel threaded inserts, and adjustable feet enable the machine to be installed perfectly level and central in any flange from 500mm to 1650mm in diameter.

Drive Power unit

The machine is driven by a 2.9HP pneumatic motor, It can achieve cuts up to a maximum depth of 2mm (0.079″) on flanges without bolt holes or 0.5mm (0.02″) with holes.

FDG1000 Flange Facer is a versatile flange facing machine that allows you to face, bevel, and turn pipe, valve, and pump flanges with easy, and can give machine shop accuracy. Three pieces mounting system makes setup and alignment of this machine quick and easy. It allows one operator to set up the machine and begin machining in just a few minutes.

Superior Machining

It can cut “O” Ring grooves, Lens ring, RTJ grooves, RF, weld preparations etc.

Lightweight & Precise Body

Modular structural design, high intensity of material and processing technology, which makes sure the accuracy of processing.

Base assembly

Equipped three pieces high strength mounting base unit with steel threaded inserts, and adjustable feet enable the machine to be installed perfectly level and central in any flange from 150mm (6″) to 1000mm (40″) in diameter.

Quick Set Up

Flange facing machine adopt independent design of quick model parts, therefore, it’s fast to mount it and machining. An experienced operator will finish the mounting processing within an hour according to the rightful operating process.

Drive Power Unit

The machine is driven by a 1.7KW (2.2HP) Pneumatic motor, it can achieve cuts up to a maximum depth of 2mm (0.079″) on flanges without bolt holes or 0.2mm with holes and can achieve a flatness better than 0.02mm at 762mm (30″) diameter.