FDG1000 Flange Facer is a versatile flange facing machine that allows you to face, bevel, and turn pipe, valve, and pump flanges with easy, and can give machine shop accuracy. Three pieces mounting system makes setup and alignment of this machine quick and easy. It allows one operator to set up the machine and begin machining in just a few minutes.

Superior Machining

It can cut “O” Ring grooves, Lens ring, RTJ grooves, RF, weld preparations etc.

Lightweight & Precise Body

Modular structural design, high intensity of material and processing technology, which makes sure the accuracy of processing.

Base assembly

Equipped three pieces high strength mounting base unit with steel threaded inserts, and adjustable feet enable the machine to be installed perfectly level and central in any flange from 150mm (6″) to 1000mm (40″) in diameter.

Quick Set Up

Flange facing machine adopt independent design of quick model parts, therefore, it’s fast to mount it and machining. An experienced operator will finish the mounting processing within an hour according to the rightful operating process.

Drive Power Unit

The machine is driven by a 1.7KW (2.2HP) Pneumatic motor, it can achieve cuts up to a maximum depth of 2mm (0.079″) on flanges without bolt holes or 0.2mm with holes and can achieve a flatness better than 0.02mm at 762mm (30″) diameter.